Garage door springs are an essential component of any garage door system. These springs play a crucial role in balancing the weight of the garage door and allowing it to open and close smoothly. Over time, garage door springs may wear out or break, which can lead to significant safety hazards and require replacement. In this research, we will cover in-depth information about garage door springs replacement, including the different types of springs, signs of wear and tear, cost of replacement, and the process of replacement.
Types of Garage Door Springs
There are two primary types of garage door springs: torsion springs and extension springs.
Torsion springs are the most common type of garage door springs used in residential and commercial garage doors. They are typically mounted above the garage door and work by twisting and untwisting to create tension and lift the door. Torsion springs are available in a variety of sizes and strengths depending on the weight of the garage door and the frequency of use.
Extension springs are mounted on the sides of the garage door and work by stretching and contracting to create tension and lift the door. They are less common than torsion springs and are typically used in smaller residential garage doors.
Signs of Wear and Tear
Over time, garage door springs can wear out or break due to the stress of daily use. Here are some signs that indicate that garage door springs need to be replaced:
- The garage door is not opening or closing smoothly.
- The garage door is making loud creaking or banging sounds.
- The garage door feels heavier than usual when lifting or lowering.
- The garage door is uneven or crooked.
- The garage door falls quickly when released from the open position.
Cost of Replacement
The cost of replacing garage door springs can vary depending on the type of springs, the size and weight of the garage door, and the cost of labor. Generally, the cost of torsion spring replacement ranges from $280 to $480, while extension spring replacement can cost between $90 to $140. However, it is essential to note that attempting to replace garage door springs without professional assistance can be dangerous and potentially fatal.
Process of Replacement
Garage door spring replacement should always be performed by a professional who has the necessary tools, training, and experience to safely and correctly replace the springs.
Here is an overview of the process of garage door spring replacement:
- The professional will release the tension on the existing springs and remove them from the garage door system.
- The professional will measure the size and strength of the existing springs and select new springs that are the correct size and strength for the garage door.
- The new springs will be installed and adjusted to the correct tension to balance the weight of the garage door.
- The professional will test the garage door to ensure that it opens and closes smoothly and safely.
In conclusion, garage door spring replacement is an essential aspect of garage door maintenance and should only be performed by a professional. Understanding the different types of springs, signs of wear and tear, cost of replacement, and the process of replacement can help you make informed decisions about the care and maintenance of your garage door system.